Cleaning Risers
Cleaning Risers
These have been installed for 30 years I figured it was time to inspect them. I'm glad I did because there was scaling and impeller peaces built up around the mixing tip of the riser restricting water flow . Flushed them out and some new gaskets (with silicone) good to go. I think they look amazing for there age got to love the
1988 Marinette 32' FBS
318's 240 hp
Pittsburgh, PA
318's 240 hp
Pittsburgh, PA
Re: Cleaning Risers
Do yourself a favor and (if you can) and have those flanges surfaced by a machine shop. (They get out of flat over time.)
Be sure to silicone BOTH sides of the gasket with a THIN coating when reinstalling. and retighten the bolts after the motor fully warms up.
Jeff
Be sure to silicone BOTH sides of the gasket with a THIN coating when reinstalling. and retighten the bolts after the motor fully warms up.
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington