Chrysler marine replacement distributors
Chrysler marine replacement distributors
Replace you worn out distributor
http://www.amazon.com/gp/product/B004OX ... KFFNCG626T
and
http://www.amazon.com/Pertronix-D241800 ... 6QQMK15TYP
also check SUMMIT Racing site
bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
-
- Tin star
- Posts: 45
- Joined: Thu Aug 28, 2014 7:43 am
Re: Chrysler marine replacement distributors
Loves me some Summit Racing. Akron proud, baby. I'm lucky enough to be within a half hour of the headquarters/retail store.
Sean
Sean
1970 42' Inland Seas Aluminum Cruiser
Inland C's
Twin Star Power Turbo 7.3 EFI Diesels
ZF Trannys
Port Clinton, OH
1972 32' Marinette FB Express
Siff Surf
Twin Chrysler 318s
Original Prestolite Distributors (No Issues)
Port Clinton, OH
Inland C's
Twin Star Power Turbo 7.3 EFI Diesels
ZF Trannys
Port Clinton, OH
1972 32' Marinette FB Express
Siff Surf
Twin Chrysler 318s
Original Prestolite Distributors (No Issues)
Port Clinton, OH
-
- Aluminum Star
- Posts: 174
- Joined: Sun Dec 07, 2014 8:50 pm
- Location: Northern Kentucky
Re: Chrysler marine replacement distributors
Performance Distributors in Memphis,Tn. Will custom build HEI type distributors for your Chrysler Marine engines. Phone 901-396-5782. Yes they can make one for your counter-rotating engine. Cost is aprox. $968 including their excellent start plug wires.
Trower Power
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set
Re: Chrysler marine replacement distributors
Pertronix will mod them as well for a pretty small fee.
This deal is crazy good!
This deal is crazy good!
2x 1973 28 Express - Single 318
New electrical panels, water system and velvet drive
Miami FL & Catawba OH
New electrical panels, water system and velvet drive
Miami FL & Catawba OH
Re: Chrysler marine replacement distributors
SITE NO LONGER EXISTS
bill
Last edited by bill on Sun Mar 07, 2021 10:40 am, edited 1 time in total.
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
Re: Chrysler marine replacement distributors
(Sound like a broken record...) When buying a replacement distributor, be dammed sure it will work with reverse rotating engines---the distributor HAS to be designed to absorb the upward thrust loads.
Jeff
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
-
- Site Admin
- Posts: 410
- Joined: Sat Jul 12, 2014 6:18 am
- Location: Kentucky
Re: Chrysler marine replacement distributors
Ok I think there are some info in the archives. I have been field testing a pair of Pertronix Dist. for them. Counter Rotating engines. This is the 4th season. My startup was normal and they have run great! The reason for the field test was there were issues with corrosion on some earlier ones. Now there was some and still is some light corrosion on these but NO issue with their operation! I do clean them up spring and fall and lubricate with some light oil. (I use a commercial product called "Loosey Goosey") Funny name but great stuff. Anyway I do have pictures and info for those interested. What I like best is the ease to get to the advance. It is on top so very easy to inspect and clean. These came with several springs to adjust advance curve. I played with them but found the ones that were on it from the factory worked the best.
Now I have received no compensation other than the distributors to test. I have not financial involvement with Pertronix just reporting my findings over the past three seasons and now going into season four!
Safe Boating,
dave
Now I have received no compensation other than the distributors to test. I have not financial involvement with Pertronix just reporting my findings over the past three seasons and now going into season four!
Safe Boating,
dave
1987 Marinette 29 FB Sedan
Retired Boat Accident UL and USCG trained investigator
Retired USCG Captain
Retired Boat Accident UL and USCG trained investigator
Retired USCG Captain
Re: Chrysler marine replacement distributors
I'm in the same boat as Dave I also was given a field test distributor last year with all the latest and greatest coatings on the internal parts. I have to say I had a lot of back and forth shipping because of the distributor length not being correct and I have the conversion in my old distributor with again some odd things gong on but at the end of the day the guys at Pertronix is making things right for our group and making a very good product for the price.
Jeff Monday (Blue Mondays)
1973 28 ft Express single 318 1976 StarCraft Islander 1961 Sea Nymph
Lower River rd
Rabbit Hash KY
1973 28 ft Express single 318 1976 StarCraft Islander 1961 Sea Nymph
Lower River rd
Rabbit Hash KY
Re: Chrysler marine replacement distributors
I returned my distributor unit (second time) because it didn't fit due to the spacer. The last tech I spoke with told me they could mod it for a small fee so it would work. This last guy told me no and that the warranty would be voided. So I sent it back.
I'm in a jam now because I did the under cap Pertronix mod and my stock distributor is a rusty mess and acting funny. I ordered a stock replacement and they balked and refunded my money. I can't find a stock distributor anywhere and I would only go with Pertronix for the distributor.
I'm pretty frustrated because these shouldnt be hard to find and Pertronix should know better than to make them with these spacers on them
I'm in a jam now because I did the under cap Pertronix mod and my stock distributor is a rusty mess and acting funny. I ordered a stock replacement and they balked and refunded my money. I can't find a stock distributor anywhere and I would only go with Pertronix for the distributor.
I'm pretty frustrated because these shouldnt be hard to find and Pertronix should know better than to make them with these spacers on them
2x 1973 28 Express - Single 318
New electrical panels, water system and velvet drive
Miami FL & Catawba OH
New electrical panels, water system and velvet drive
Miami FL & Catawba OH
Re: Chrysler marine replacement distributors
Damn right they should! Good luck.
Jeff
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington