rear couch/bed

Fresh & Waste Water Systems, Climate Control, etc.
Post Reply
honestcharlie56
Royal Aluminum Star
Posts: 258
Joined: Tue Jul 19, 2016 8:27 pm
Location: Lake Charles, LA

rear couch/bed

Post by honestcharlie56 »

I know its a long shot, but does anyone have any drawings or pictures of the rear couch/bed. We have had our boat a few years and can't seem to locate a replacement, so we are going to build one. Thanks
1990 Marinette 32 Sedan Flybridge "Hubba" Lake Charles, LA
Twin Chrysler 318's
GregM
Tin star
Posts: 30
Joined: Sat Jul 22, 2017 5:01 pm

Re: rear couch/bed

Post by GregM »

I don't have any drawings but mine just happens to be in my garage right now since I am finishing up an engine replacement. I set it out on my trailer and snapped a couple pics for you. If you are looking for a specific measurement let me know. Notice the back does not have a 90 degree angle. Its more like 80 but not 100% sure.
IMG_1875.jpg
IMG_1877.jpg
User avatar
shade2u2
Royal Aluminum Star
Posts: 290
Joined: Mon Jul 21, 2014 3:11 pm
Location: Marietta, Ohio -mile marker 172

Re: rear couch/bed

Post by shade2u2 »

This one was custom made for ours.
The seat area lifts up with spring assisted hinges and there is storage inside. I don't have drawings but could get pictures of the mechanics and dimensions.
Attachments
Salon Couch2a.jpg
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
User avatar
shade2u2
Royal Aluminum Star
Posts: 290
Joined: Mon Jul 21, 2014 3:11 pm
Location: Marietta, Ohio -mile marker 172

Re: rear couch/bed

Post by shade2u2 »

Here are pictures of the couch opened up and the hinge:
salon couch3.JPG
salon couch4.JPG
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
Post Reply