I have a Carter AFB carburetor on my Chrysler 360 engine and need to know what thickness the gasket should be between the carb and the manifold
How thick was the original gasket from the factory Please and Thank You
Very needy
bill
carburetor question need to know
carburetor question need to know
I have a Carter AFB carburetor on my Chrysler 360 engine and need to know what thickness the gasket should be between the carb and the manifold
How thick was the original gasket from the factory Please and Thank You
Very needy
bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
-
barefoot99
- Tin star
- Posts: 85
- Joined: Sun Jul 13, 2014 9:44 pm
- Location: Cincinnati OH
Re: carburetor question need to know
It is a standard gasket @1/8'' thick , never measured the thickness before ? I'll bet Fast Jeff has !
SUP !
1982 32 Sedan FB
2269 hrs
360's-Edelbrocks, DUI
Raw water cooled
Norris Lake
Speedwell,TN.
1982 32 Sedan FB
2269 hrs
360's-Edelbrocks, DUI
Raw water cooled
Norris Lake
Speedwell,TN.