318/392 Stroker Motors

Fastjeff
Site Admin
Posts: 1060
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD
Contact:

Re: 318/392 Stroker Motors

Postby Fastjeff » Tue Jul 24, 2018 7:20 am

Can't wait to head the results!

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington

Trowerpower
Aluminum Star
Posts: 141
Joined: Sun Dec 07, 2014 8:50 pm
Location: Northern Kentucky

Re: 318/392 Stroker Motors

Postby Trowerpower » Mon Nov 12, 2018 3:31 pm

Did not get to change the props this year, will do it in the spring. 210 hours on the engines and they are running great. Winterized the boat last weekend, dewinterize early April. Stay warm until the spring!
Trower Power
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set

Fastjeff
Site Admin
Posts: 1060
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD
Contact:

Re: 318/392 Stroker Motors

Postby Fastjeff » Tue Nov 13, 2018 7:04 am

That's a good deal of hours. Sure proved themselves out. Good work!

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington

Trowerpower
Aluminum Star
Posts: 141
Joined: Sun Dec 07, 2014 8:50 pm
Location: Northern Kentucky

Re: 318/392 Stroker Motors

Postby Trowerpower » Fri Feb 01, 2019 9:51 pm

Hey Jeff! Spring is two months away, looking foward to pulling Blue Sky to clean the hull, check intakes and anodes and swap out the props. Yes, i beleve the engines are going to live a long life now.. we used good parts so by now any install issues should have raised there head. Fingers crossed!
Trower Power
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set

Fastjeff
Site Admin
Posts: 1060
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD
Contact:

Re: 318/392 Stroker Motors

Postby Fastjeff » Sat Feb 02, 2019 6:49 am

The "There's no replacement for displacement!" rule wins again.

Fascinating project. What props are you going to use?

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington

Trowerpower
Aluminum Star
Posts: 141
Joined: Sun Dec 07, 2014 8:50 pm
Location: Northern Kentucky

Re: 318/392 Stroker Motors

Postby Trowerpower » Mon Feb 18, 2019 9:22 pm

Hey Jeff, i bought them several years ago, i will pull my folder and post the size soon. They are 4 blade props.
Trower Power
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set

Trowerpower
Aluminum Star
Posts: 141
Joined: Sun Dec 07, 2014 8:50 pm
Location: Northern Kentucky

Re: 318/392 Stroker Motors

Postby Trowerpower » Wed Feb 20, 2019 10:32 am

Delta Propeller in Cincinnati recommended 15 x 14.25 Acme 4 blade props with .045 cup. Part no. 2262acme and no.2263acme. My guestimate on the total weight of our boat is 14,000 pounds with all equipment ,fuel, water, iesenglass etc. The engine builder rated the engines at 350h.p. Norris Lake is almost full now with all the rain the southeast is getting and more coming. This will bring lots of debris so i am not sure when we will pull the boat but we are shooting for early April.
Trower Power
1987 32ft Marinette Sedan Flybridge
Blue Sky
twin 392 Chrysler Stroker Motors
Performance Distributors
750 Edlebrocks
fresh water cooled
1.5 to 1 velva-drives
Onan 6.5kw gen set