Ceramic starter item
Ceramic starter item
Can someone tell me what this is. It crumbled when I tried to remove it. I am not sure what to ask for at the local part store or if it is marine specific? Its for a 318 Chrysler motor I am rebuilding and is part of the starter circuit. Any advise on where to get a replacement would also be helpful?
Re: Ceramic starter item
That is your ignition ballast resistor. You must have electronic ignition. Sierra p/n 18-5451
I think the automotive ones are the same.
I think the automotive ones are the same.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson
Re: Ceramic starter item
Thank you man! I can't afford any more marine costs! Your a life savor!
-
- Royal Aluminum Star
- Posts: 415
- Joined: Sat Jan 10, 2015 7:14 pm
Re: Ceramic starter item
Hold on there !! You MUST use the marine specific ballast. The automotive version is not sealed and thus will cause an engine room fire. I think NAPA carries both auto and boat ballasts for close to the same price, but you MUST use the marine version.
Jim Elias
1974 37' SedanFlybridge
Twin 360 Chryslers.
Marblehead, Ohio
1974 37' SedanFlybridge
Twin 360 Chryslers.
Marblehead, Ohio
Re: Ceramic starter item
Stick with marine! Got it, thank you for pointing that out! No fire hazard is worth saving a few bucks.
-
- Tin star
- Posts: 29
- Joined: Sat Feb 17, 2018 4:26 pm
- Location: louisville ky
Re: Ceramic starter item
Amazon carries them also. Just order 2 of them
Rodney Hack
Louisville,Ky
1975 32' sedan flybridgehttp://www.marinetteboat.com/forum/ucp.php?i=u ... =signature#
Louisville,Ky
1975 32' sedan flybridgehttp://www.marinetteboat.com/forum/ucp.php?i=u ... =signature#
Re: Ceramic starter item
Definitely carry a spare and make sure it is a Marine ballast resistor. The back will be filled with ceramic or epoxy. There is no way of knowing when it will burn out. Usually at the worst possible time.
Welcome to the world of Marinette..
bill
ps When you get a chance please add a signature to your posts.
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill