Haul Out Schedule
Haul Out Schedule
Last edited by carl on Wed Jul 10, 2019 10:44 am, edited 15 times in total.
-
- Royal Aluminum Star
- Posts: 266
- Joined: Mon Jan 19, 2015 11:07 pm
- Location: Lake Superior-Michigan's U.P.
Re: Haul Out Schedule
Marysville Marine is were I got my non metallic cutless bearings. You just have to know the exact sizes. There is also cutless bearings in the rudder tubes, usually you have to cut the bearings in half and put one in the top side and one in the bottom.
Rodney
1975 28 Express-Twin 350 Chevy's, SOLD
1990 32 Express--Twin Mercruiser 454 with Bravo I outdrives
Portage Canal Waterway-Upper Peninsula,Lake Superior
1975 28 Express-Twin 350 Chevy's, SOLD
1990 32 Express--Twin Mercruiser 454 with Bravo I outdrives
Portage Canal Waterway-Upper Peninsula,Lake Superior
Re: Haul Out Schedule
Last edited by carl on Wed Jul 10, 2019 10:42 am, edited 1 time in total.
Re: Haul Out Schedule
Carl,
Full length bearings aren't needed. The supporting points are more than adequate. Additionally, when it comes time to change them (in several years), you'd find it very tuff to remove.
NOTE - FastJeff had a process on an old site that used a reverse ground "V" chisel to remove old bearings.
Bill
Full length bearings aren't needed. The supporting points are more than adequate. Additionally, when it comes time to change them (in several years), you'd find it very tuff to remove.
NOTE - FastJeff had a process on an old site that used a reverse ground "V" chisel to remove old bearings.
Bill
Last edited by bcassedy on Mon Jan 23, 2017 4:19 pm, edited 2 times in total.
Bill & Sharon Cassedy
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
Re: Haul Out Schedule
Last edited by carl on Wed Jul 10, 2019 10:42 am, edited 2 times in total.
Re: Haul Out Schedule
I purchased my non-metallic bearings from this place:
https://www.deepblueyachtsupply.com/marine-bearings
Worked out great!
https://www.deepblueyachtsupply.com/marine-bearings
Worked out great!
Maestro
1986 32' Sedan
Chrysler 360s
1.5:1 Gears, 16x16 props
1970 28' Express
Single Chrysler 440
1:1 Gear, 14x12 prop
Green Bay, WI
1986 32' Sedan
Chrysler 360s
1.5:1 Gears, 16x16 props
1970 28' Express
Single Chrysler 440
1:1 Gear, 14x12 prop
Green Bay, WI
Re: Haul Out Schedule
After reading that list, boy am I glad to be a trailered, 19 foot I/O guy!
Jeff
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington