Riser Gaskets
Riser Gaskets
Think I've finally found the source of my overheating, old impeller pieces have stopped up the water port in the riser. Does anyone have the part numbers for the gaskets manifold to riser and riser to elbow. Also while the ends are open any tips on rodding out the manifolds?
"Deplorable", 1975 32' Express, Twin 318's, Raw Water Cooled, Lake Lanier, Ga.
-
- Royal Aluminum Star
- Posts: 413
- Joined: Sat Jan 10, 2015 7:14 pm
Re: Riser Gaskets
Depends, as I think there are two different type of Chrysler manifolds.
Jim Elias
1974 37' SedanFlybridge
Twin 360 Chryslers.
Marblehead, Ohio
1974 37' SedanFlybridge
Twin 360 Chryslers.
Marblehead, Ohio
Re: Riser Gaskets
There is and I should have been more specific. What I've found since my original posting is Osco and Barr use the same gaskets, ordered mine from a company by the the name of Mr. Cool. Also comes with new bolts.
"Deplorable", 1975 32' Express, Twin 318's, Raw Water Cooled, Lake Lanier, Ga.
- shade2u2
- Royal Aluminum Star
- Posts: 290
- Joined: Mon Jul 21, 2014 3:11 pm
- Location: Marietta, Ohio -mile marker 172
Re: Riser Gaskets
I got Barr riser gaskets from these guys - http://www.marineengineparts.com/
The shipped timely and at a good price.
The shipped timely and at a good price.
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
1986 39 Sedan w/Crusader 454 & 1.92 drive.
former - '84 28 Express Hardtop w/single 360 1.5:1 drive (SOLD - now in Uruguay)
Ohio and Muskingum Rivers (Marietta, OH)
Re: Riser Gaskets
WHy not put the vendor info in the VENDROS section of the froum for clearer (easier to search) future reference. Thnx
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD