Another project completed and many more to come. Enjoy the video, I hope this inspires someone else to keep making these old boats looks new again… thanks for watching!!!!
https://youtu.be/5985enPZisc
Painted the Vee birth , Galley , and Head clean new look…
-
- Tin star
- Posts: 33
- Joined: Mon Jul 04, 2022 7:05 pm
- Location: Southern Illinois
- Contact:
Painted the Vee birth , Galley , and Head clean new look…
Aaron King
Vessel Name- Fit For A King
1987 Marinette 32 FB Twin 318’s 525 Hours
Westerbeke 8.5 KW generator 674 hours
Metropolis,IL
Vessel Name- Fit For A King
1987 Marinette 32 FB Twin 318’s 525 Hours
Westerbeke 8.5 KW generator 674 hours
Metropolis,IL
Re: Painted the Vee birth , Galley , and Head clean new look…
It never occurred to me to paint over that wall paper, but it looks good on the video. On my 28' the wall paper was soiled so I removed it from the firewall and replaced it with vinyl wainscoting. I replaced the head/galley bulkhead with a sandwich of 1/4" plywood and vinyl wainscoting. The panels attached to the hull were only 1/4" plywood so I replaced them with the same thing, but back-primed and glued vinyl to the front side. The originals held up for 30+ years with only a little rot and I used them for templates. If I had it to do over again I'd use epoxy paint on both sides of the panels It was a real PIA to glue the vinyl to the plywood and I got a couple bubbles though fortunately they were not noticeable in the final installation.
I'm trying to convince myself to do a 37. . . .
I'm trying to convince myself to do a 37. . . .
Joe Napoli
1977 28' Express
Twin raw water cooled 318s
Beaver River--near mile 25 on the Ohio
1977 28' Express
Twin raw water cooled 318s
Beaver River--near mile 25 on the Ohio
-
- Tin star
- Posts: 33
- Joined: Mon Jul 04, 2022 7:05 pm
- Location: Southern Illinois
- Contact:
Re: Painted the Vee birth , Galley , and Head clean new look…
I am very pleased on how it turned out, and will definitely do it again if needed. Good quality paint and primer and you will have no issues, and so many colors to choose from.
Aaron King
Vessel Name- Fit For A King
1987 Marinette 32 FB Twin 318’s 525 Hours
Westerbeke 8.5 KW generator 674 hours
Metropolis,IL
Vessel Name- Fit For A King
1987 Marinette 32 FB Twin 318’s 525 Hours
Westerbeke 8.5 KW generator 674 hours
Metropolis,IL
Re: Painted the Vee birth , Galley , and Head clean new look…
((BTW, I am reluctant to be the Spelling Cop, but what the heck -- it's a berth not a birth. I'm sure that was a typo, yes?))
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
Re: Painted the Vee birth , Galley , and Head clean new look…
I think so. I Googled Vee Birth and found it very informative, but not much about boats.
BUSIA
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
-
- Tin star
- Posts: 33
- Joined: Mon Jul 04, 2022 7:05 pm
- Location: Southern Illinois
- Contact:
Re: Painted the Vee birth , Galley , and Head clean new look…
Lol, country hick here, I need to go back to school, lol!!!!
Aaron King
Vessel Name- Fit For A King
1987 Marinette 32 FB Twin 318’s 525 Hours
Westerbeke 8.5 KW generator 674 hours
Metropolis,IL
Vessel Name- Fit For A King
1987 Marinette 32 FB Twin 318’s 525 Hours
Westerbeke 8.5 KW generator 674 hours
Metropolis,IL