Exhaust Manifold Options?

Post Reply
GregM
Tin star
Posts: 30
Joined: Sat Jul 22, 2017 5:01 pm

Exhaust Manifold Options?

Post by GregM »

Apparently i didn't get all the water out of on of my manifolds when pulling the engine out for rebuild over winter. Nothing like adding insult to injury. Anyone know where to get a used or reasonably priced exhaust manifold for a 1987 318?
ddependo
Royal Aluminum Star
Posts: 292
Joined: Mon Jul 14, 2014 10:00 am

Re: Exhaust Manifold Options?

Post by ddependo »

try MetalHead (member)
1973 32 express fly bridge
Chattanooga
"Southern Lady"
EWRice
Royal Aluminum Star
Posts: 319
Joined: Thu Feb 04, 2016 12:37 pm

Re: Exhaust Manifold Options?

Post by EWRice »

I should have a few good used ones. How many do you need? What style do you have?
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson
GregM
Tin star
Posts: 30
Joined: Sat Jul 22, 2017 5:01 pm

Re: Exhaust Manifold Options?

Post by GregM »

That would be great EW. I only need one at the moment. Attached is a pic of what I have. Its from the reverse rotation engine port side.
Manifold
Manifold
EWRice
Royal Aluminum Star
Posts: 319
Joined: Thu Feb 04, 2016 12:37 pm

Re: Exhaust Manifold Options?

Post by EWRice »

Unfortunately you have the less common manifold that was only used in the last few years of Chrysler Marine production. I do not have any of those manifolds but I believe they are available new at just under $500 each.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson
SunbeamIV
Tin star
Posts: 42
Joined: Fri Aug 14, 2015 5:47 am

Re: Exhaust Manifold Options?

Post by SunbeamIV »

That may be able to be welded. I had one repaired at this place in Cleveland:
Guarantee Auto Weld Co Inc
216-431-1214
Scott, 32' 1989 sedan flybridge
Located: Edgewater Yacht Club
Lake Erie
BobCav
Tin star
Posts: 22
Joined: Thu Nov 08, 2018 11:53 pm
Location: Virginia
Contact:

Re: Exhaust Manifold Options?

Post by BobCav »

That's the same style I put in my 74 318 when I converted to FWC. That's a Barr Marine CM-1-4417063 Manifold available here for $326.99 new

https://www.marineengineparts.com/barr- ... 3-manifold
Bob Cavalcante, SCPO USN (Ret.)
Gel coat is for ladies' fingernails!
1985 32 Fisherman, Twin Crusader 270's. No lead onboard: one Relion 300aH LiFePo4 House batt with one Maxwell Ultracapacitor Engine Start Module to start BOTH engines!
Post Reply