39ft sedan engine hatches

Fresh & Waste Water Systems, Climate Control, etc.
Post Reply
ukester
Tin star
Posts: 89
Joined: Sun Jul 13, 2014 7:13 am

39ft sedan engine hatches

Post by ukester »

installing a new floor in the salon and running into trouble with the engine hatches-really looking for some sort of metal that attaches to the hatch but overlaps kind of like a t-any one have a idea of where I can find something that would work?

Thanks Mark
mark ucakar
Fastjeff
Site Admin
Posts: 1521
Joined: Sat Jul 12, 2014 5:06 am
Location: Rock Halll, MD

Re: 39ft sedan engine hatches

Post by Fastjeff »

I used 1/8 x 2 inch aluminum. Easy to drill the zillion holes, then countersink them so the screws are flush. A good hardware store sells it.

Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington
User avatar
bill
Royal Aluminum Star
Posts: 520
Joined: Sat Jul 12, 2014 7:17 am
Location: Grosse Ile MI

Re: 39ft sedan engine hatches

Post by bill »

BigM

:| or if you are lazy you can buy TACO SS predrilled hatch trim. ;)

http://tacomarine.com/category/cat_alum ... d-Moulding

scroll to the bottom of the page.


bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
Post Reply