Dinette parquet, looking for a section

Fresh & Waste Water Systems, Climate Control, etc.
User avatar
bcassedy
Royal Aluminum Star
Posts: 345
Joined: Sun Jul 13, 2014 10:05 am
Location: Aurora, In.
Contact:

Dinette parquet, looking for a section

Postby bcassedy » Fri Jul 06, 2018 6:45 am

A section of our dinette's parquet floor is missing one of the pieces (popped off when lifting the adjacent access panels fpr the AC pump/valve and I didn't notice ). It's possible it's down in the forward bilge but I haven't located it yet. It's likely it'll be "uggy".

Anyone have a spare square section -or- pieces from a square section they'd ne willing to part with?

Thx,
Bill
Bill & Sharon Cassedy
"Sunset Seeker"
'88 32' Sedan Bridge
Located in Aurora, In.
Twin 318cu in Chrysler
1.5:1 Velvet drive trannies
Fresh water only

Leviathon
Aluminum Star
Posts: 120
Joined: Mon Jul 14, 2014 10:04 am

Re: Dinette parquet, looking for a section

Postby Leviathon » Fri Jul 06, 2018 7:25 am

Bill, I don't know exactly what you are looking for, but I picked up a dinette table that is parquet that I most likely will not use. Not sure if that could help?

Steve
Steve and Mary Levi
1973 32' Marinette Fisherman
SBC Crusaders
El Ohssa
St. Joseph, Michigan

User avatar
ThunderStruck
Tin star
Posts: 24
Joined: Sun Jan 28, 2018 7:00 pm

Re: Dinette parquet, looking for a section

Postby ThunderStruck » Wed Jan 23, 2019 4:27 pm

Are you still looking? I am taking up my Parquet floor. I have lots of squares in decent shape...
Mike Calp
ThunderStruck
1978 32' FB Sedan
Twin 318s
Middle River,Md

User avatar
bcassedy
Royal Aluminum Star
Posts: 345
Joined: Sun Jul 13, 2014 10:05 am
Location: Aurora, In.
Contact:

Re: Dinette parquet, looking for a section

Postby bcassedy » Wed Jan 23, 2019 10:11 pm

I could use a couple of squares. I did find the missing piece of the square I originally mentioned. It had fallen into the forward bilge and floated towards the bow. It showed up when I took a shop vac and was cleaning the water out of the bilge. Floated right up to the vac's nozzle. The fwd bilge pump had caused it to stay forward.

PM me and let me know what arrangements we can make.

Thx!
Bill
Bill & Sharon Cassedy
"Sunset Seeker"
'88 32' Sedan Bridge
Located in Aurora, In.
Twin 318cu in Chrysler
1.5:1 Velvet drive trannies
Fresh water only

User avatar
shade2u2
Royal Aluminum Star
Posts: 258
Joined: Mon Jul 21, 2014 3:11 pm
Location: Marietta, Ohio -mile marker 172

Re: Dinette parquet, looking for a section

Postby shade2u2 » Thu Jan 24, 2019 9:46 am

I would also be interested... please.
John
1986 39 Sedan w/Crusader 454 & 1.92 drive.
1984 28 Express Hardtopw/single 360 1.5:1 drive (SOLD)
Ohio and Muskingum Rivers (Marietta, OH)

bpboater
Tin star
Posts: 26
Joined: Sun Jul 13, 2014 6:54 am
Location: Jamestown, KY

Re: Dinette parquet, looking for a section

Postby bpboater » Fri Jan 25, 2019 9:35 am

I need some squares as well. I spilled antifreeze on the floor and I think a lot of the parquet might release from the floor. I don't know if I can reglue it. I would like to buy about 20 squares (6 inch by 6 inch.
1988 41 Marinette
Twin Crusader 454-350 hp closed cooling
Westerbeke 8.5 kw BTG
Lake Cumberland, KY

User avatar
ThunderStruck
Tin star
Posts: 24
Joined: Sun Jan 28, 2018 7:00 pm

Re: Dinette parquet, looking for a section

Postby ThunderStruck » Fri Jan 25, 2019 6:02 pm

bpboater...PM Me...
Mike Calp
ThunderStruck
1978 32' FB Sedan
Twin 318s
Middle River,Md

User avatar
Tuggle
Aluminum Star
Posts: 127
Joined: Sun Jun 26, 2016 4:42 am

Re: Dinette parquet, looking for a section

Postby Tuggle » Sat Jan 26, 2019 8:36 am

We replaced ours with interlocking foam rubber gym floor tiles, wood grain, looks good, feels good and if its damaged easily replaceable. Might also add very easy to cut, although I cut mine on a band saw you could probably cut it with a razor knife.
"Deplorable", 1975 32' Express, Twin 318's, Raw Water Cooled, Lake Lanier, Ga.