Sensor on back of Intake manifold.....

Engines, Shafts, Steering, Struts, Rudders, etc.
Wilfred
Tin star
Posts: 39
Joined: Sat Oct 01, 2016 1:40 am

Re: Sensor on back of Intake manifold.....

Post by Wilfred »

Standard Motor Products PS160 looks closer....
W. J. Brockman
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan
jralbert
Site Admin
Posts: 885
Joined: Fri Jul 11, 2014 9:15 pm

Re: Sensor on back of Intake manifold.....

Post by jralbert »

$310 sounds awfully high for oil pressure sensor. They are notoriously weak and should be regularly inspected. After one blew on me (luckily !!! while I was looking at it by chance), I stocked a couple of spares and if they had cost $310 I would have remembered that.
-joel-
former owner 1988 '32 FB Sedan
Chesapeake Bay
twin 318 / 240 hp
Potomac MD
Wilfred
Tin star
Posts: 39
Joined: Sat Oct 01, 2016 1:40 am

Re: Sensor on back of Intake manifold.....

Post by Wilfred »

I believe a Standard Motor Parts PS160 is more like it
W. J. Brockman
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan
Wilfred
Tin star
Posts: 39
Joined: Sat Oct 01, 2016 1:40 am

Re: Sensor on back of Intake manifold.....

Post by Wilfred »

Sorry for the confusion,,,That was a part number not a $ amount
It is a $5 (five dollar) part ..I have seen them as low as $3 and as high as $13
W. J. Brockman
1984 Marinette Express Bridge
Twin 318s 235 hp
Bolles Harbor, Michigan
Post Reply