Before and After Topside Color Scheme

Corrosion, Paint, Through Hulls, etc.
Site Admin
Posts: 817
Joined: Sat Jul 12, 2014 5:06 am

Re: Before and After Topside Color Scheme

Postby Fastjeff » Tue Feb 07, 2017 6:14 am

Ever notice how dark colored boat are much more visible at a distance? So why are so many boats painted white?

"White, white the body shop delight; covers every screw up in sight!" This is especially true with mass produced fiberglass boats. Paint a decent looking white boat (or car) black and you'll get seasick eyeballing the hull!

"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington

Aluminum Star
Posts: 189
Joined: Thu Feb 04, 2016 12:37 pm

Re: Before and After Topside Color Scheme

Postby EWRice » Tue Feb 07, 2017 11:35 am

A friend of mine was repainting a yacht in the sixty five foot range. This was a high end vessel and he wanted to go dark blue metallic. I believe he told me it took around 20 gallons of filler to fair each hull side. White has its pros.
Muskegon Lake
1972 32' Express flybridge
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson

Aluminum Star
Posts: 111
Joined: Sat Jul 12, 2014 8:26 pm
Location: Pittsburgh, PA

Re: Before and After Topside Color Scheme

Postby Rockit » Tue Feb 07, 2017 8:06 pm

And from having a boat with a dark blue hull, I can tell you that you can see every scrape and ding. Sure you can touch up the paint, but it's obvious. (At least to me. Everyone else thought it looked great.) I also buffed out the finish every fall and followed up with a wax job in the spring.

Good luck.
Joe Napoli
1977 28' Express
Twin raw water cooled 318s
Beaver River--near mile 25 on the Ohio

Return to “Boat and Hull”

Who is online

Users browsing this forum: No registered users and 2 guests