Need info on steering
Need info on steering
Anybody have info on the steering on a '77 32 foot model? Is it a Morse brand cable system? Can I pull the inner cable out and leave the outer sheath? How do I get it apart at the helm? Where can I get parts? Any help would be greatly appreciated--Ed
BUSIA
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
located in Ketchikan, Alaska. Gods country
32 foot Marinette (no fly bridge)
twin 350 Crusader (Chev 350) engines
1:1 Borg Warner velvet drive transmissions
Closed cooling (antifreeze in the engine)
Proud to be retired IBEW and an A+P
Re: Need info on steering
Look up steering on UTUBE, If I remember correctly, there is a number on rudder end; if Teleflex the last 2 digits are length in feet, If Morse last 3 digits in inches.
Roger
Roger
"Sea Jay" a 37' Double cabin with twin factory Volvo diesels, 230 HP each. Twin Disk 1.54 Trans turning DynaQuad 19X21 props.
Roger Brown
Petersburg, IL
Roger Brown
Petersburg, IL
Re: Need info on steering
Or you could just BOAT (break out another thousand) and switch to hydraulic steering. Best thing I did for myself and my Marinette
bill
Former owner of
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
ALUMINATION
Grosse Ile MI
Located on LakeErie
37' F/B Sedan
1975
Twin 360 Chrysler Marine
Raw water cooled
Hydraulic steering both helms
USCG Master Lic. Retired[/color]
Third Owner bill
Re: Need info on steering
Look up Morse Red Jacket control cables. Might be made by Teleflex now. Westmarine.com has a good selection.
Re: Need info on steering
You funny ( but real) Bill, LOL!