PC-7 or PC-11
PC-7 or PC-11
Which is correct for filling in minor hull pits?
Maestro
1986 32' Sedan
Chrysler 360s
1.5:1 Gears, 16x16 props
1970 28' Express
Single Chrysler 440
1:1 Gear, 14x12 prop
Green Bay, WI
1986 32' Sedan
Chrysler 360s
1.5:1 Gears, 16x16 props
1970 28' Express
Single Chrysler 440
1:1 Gear, 14x12 prop
Green Bay, WI
Re: PC-7 or PC-11
PC-11 - It's formulated for water immersion. I used it on my (unfortunately) fairly widespread pitted hull 3 years ago and it's working great. Took a tip from Jeff and primed the hull first (had the hull sandblasted) to ensure paint adhesion. Then I filled in all the pits with PC-11. Did a little minor sanding to get it all smooth and then added several more primer coats before 2 coats of bottom paint.
Bill
Bill
Bill & Sharon Cassedy
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
"Sunset Seeker"
'88 32' Sedan Bridge to be sold (updtd 1-1-22)
"Sunset Seeker Too" (SS2)
'88 41' Marquis hardtop. (as of 1/1/22)
Located in Aurora, In.
Always fresh water.
Re: PC-7 or PC-11
Been on there 10 years now without a problem. Good stuff!
Jeff
Jeff
"We live at the bottom of an ocean of air, not at the top." General Marvage Slatington