Exhaust Manifold Options?

GregM
Tin star
Posts: 25
Joined: Sat Jul 22, 2017 5:01 pm

Exhaust Manifold Options?

Postby GregM » Mon Jun 17, 2019 10:35 pm

Apparently i didn't get all the water out of on of my manifolds when pulling the engine out for rebuild over winter. Nothing like adding insult to injury. Anyone know where to get a used or reasonably priced exhaust manifold for a 1987 318?

ddependo
Royal Aluminum Star
Posts: 242
Joined: Mon Jul 14, 2014 10:00 am

Re: Exhaust Manifold Options?

Postby ddependo » Tue Jun 18, 2019 7:59 am

try MetalHead (member)
1973 32 express fly bridge
Chattanooga
"Southern Lady"

EWRice
Royal Aluminum Star
Posts: 290
Joined: Thu Feb 04, 2016 12:37 pm

Re: Exhaust Manifold Options?

Postby EWRice » Tue Jun 18, 2019 12:14 pm

I should have a few good used ones. How many do you need? What style do you have?
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson

GregM
Tin star
Posts: 25
Joined: Sat Jul 22, 2017 5:01 pm

Re: Exhaust Manifold Options?

Postby GregM » Thu Jun 20, 2019 10:04 am

That would be great EW. I only need one at the moment. Attached is a pic of what I have. Its from the reverse rotation engine port side.

IMG_1872.jpg
Manifold

EWRice
Royal Aluminum Star
Posts: 290
Joined: Thu Feb 04, 2016 12:37 pm

Re: Exhaust Manifold Options?

Postby EWRice » Fri Jun 21, 2019 10:59 am

Unfortunately you have the less common manifold that was only used in the last few years of Chrysler Marine production. I do not have any of those manifolds but I believe they are available new at just under $500 each.
Muskegon Lake
1972 32' Express flybridge
"AL13"
Twin 318s
On board air & prime 920
1963 Thompson Super Sea Lancer
Graymarine 327
1961 Alumacraft 12'
'55 10hp Johnson

SunbeamIV
Tin star
Posts: 36
Joined: Fri Aug 14, 2015 5:47 am

Re: Exhaust Manifold Options?

Postby SunbeamIV » Sun Jun 23, 2019 8:44 am

That may be able to be welded. I had one repaired at this place in Cleveland:
Guarantee Auto Weld Co Inc
216-431-1214
Scott, 32' 1989 sedan flybridge
Located: Edgewater Yacht Club
Lake Erie

BobCav
Member
Posts: 18
Joined: Thu Nov 08, 2018 11:53 pm
Location: Virginia
Contact:

Re: Exhaust Manifold Options?

Postby BobCav » Tue Jun 25, 2019 8:49 pm

That's the same style I put in my 74 318 when I converted to FWC. That's a Barr Marine CM-1-4417063 Manifold available here for $326.99 new

https://www.marineengineparts.com/barr- ... 3-manifold
Bob Cavalcante, SCPO USN (Ret.)
Gel coat is for ladies' fingernails!
1974 28' Express, Single 318
Currently being restored, eventually on Potomac and Chesapeake Bay
Follow my restoration on FB @ThisOldBoat at https://www.facebook.com/ThisOldBoat