Morse Control grips, compass, and synchronizer

Post Reply
User avatar
ronmar
Tin star
Posts: 52
Joined: Mon Jul 17, 2017 1:54 pm

Morse Control grips, compass, and synchronizer

Post by ronmar »

Hi Folks, if anyone knows of someone trying to salvage Morse Control lever grips both red and both black with hardware I sure could use them. I also need the compass, synchronizer gauge, and the teak mount for each. Still trying to locate to complete my bridge repairs from my improper securing during a transport.
Thanks in advance for help,
Ron
fly bridge compass and syc mounts 2.jpg
1990 Marinette 32 Sedan
Marty D
Port of Cincinnati
MetalHead
Site Admin
Posts: 269
Joined: Fri Jul 11, 2014 6:03 pm

Re: Morse Control grips, compass, and synchronizer

Post by MetalHead »

This just occurred to me.

You need to have one of those grips 3D modeled then have it 3D printed.
1959 Family Cruiser - Sold - Gary Dick - 12/05/14
1963 Express 31x10 - Sold - Joe & Ginger Tabor - 01/21/2017
1963 Express 31x8.5 - In Dry Dock - Restore Underway
1987 Sportsman - Lay Lake (Coosa River) Alabama
Big BigM 's Rule !!!
Columbiana, AL
User avatar
ronmar
Tin star
Posts: 52
Joined: Mon Jul 17, 2017 1:54 pm

Re: Morse Control grips, compass, and synchronizer

Post by ronmar »

Might work. Not sure where to do that but will check around. Thanks
1990 Marinette 32 Sedan
Marty D
Port of Cincinnati
Post Reply