Marinette Boat Forum

No guessing, it must GO !!!

I have debated this myself, I have an all original setup with hangers on each end of each muffler and one is level and the other rises maybe 1/2" up to the rear, drives me nuts but not so much that I have ever changed it, just enough to make me curious about the same question. Logic says level ...

Since you did not say I assume your boat does not have the capac corrosion monitor system. If it does what readings are you used to seeing, as in late last summer.

I have ordered 3 shafts and the dripless logs for the Bertram from Deep Blue Yachts as well and was equally happy in dealing with them. The have a great site and quite a few things you don't see just everywhere. Real boat people.

I re-snugged mine last week after launching with the same result as Aquaholic. I have never concerned myself with a few drips when running and if this is the case I often notice they silt shut and stop during the week and especially here on the muddy Ohio River :) I have learned to tell how much the...

Thanks for posting those links, I have printed them out and will make it permanent in my Marinette binder.

Are they returning any phone calls or just disappeared ??

I just finished doing mine last week. Took it to bare and give it 4 coats of interlux interprotect 2000E and I wanted to try using the newer pacifica plus by interlux but realized I had already bought Trilux 33 last fall and was not about to shelf the 33 and buy something else. I had recently talked...

I have switches beside those breakers in my engine room mounted just above the batteries and and am forever bumping on off and loosing power to stuff and having to go into thinking cap mode

To the original poster and speed of boat question, ... Mine is a no fly bridge 39 sedan with 440's and I can get 38 mph @ 4000/4100 rpm 60 gallons of fuel, and no water in the spring with a whistle clean fresh bottom. I just relaunched last Sat, and got 37 with 80 to 100 gallons of fuel and a good a...