Marinette Boat Forum

To avoid a web of circuits throughout the hull all devices should be bonded to specific, common location(s). The designated location(s) are the battery negative connections. These do contact the hull but only in a couple places. The engines are also bonded to these locations. The only 12DC hardware ...

On our 32 it is in the "wine cellar" storage area just behind the salon steps. I was on a 1988, 41 Marquis the other day and his was also in the same spot. If you need to replace the charger I would recommend Dual Pro. Best system I've found so far. Been using them for several years. http:...

Mine are not isolated. I've tested with meter and have continuity to hull. I've tried to wrap the shaft with electrical tape where the large Alan screw tightens the clamp but still there is a closed circuit. I suspect the cable runs to bridge and touches hull via the steering wheel hub. It is mounte...

Website below explains how to insert links, post photos (from photobucket etc) make letters bold, change colors, font size etc.
phpBBCode Guide

Just a reminder to check your shore cord sockets and plugs at both ends and any couplers in between. I just replaced a socket & wire from helm AC main to the socket on side of boat. There was char on the inside wall panel from the socket melting. This happened on a Marinette. I spray all connect...

You want fine strand, tinned wire. See wire on right side of photo.
Check Anchor Marine wire at West Marine for a reference.

-GB