Search found 170 matches
- Tue Jul 26, 2016 1:46 pm
- Forum: Drivetrain
- Topic: Carb rebuild time?
- Replies: 8
- Views: 12835
Re: Carb rebuild time?
If you need help, contact Ron Spies. Hes a FYC member and a Marinette owner. Lives 1 mile from the club. Will do that for sure going to check the basic simple stuff before we call the calvary. I'm sure he's quite busy with that awesome 34 he just acquired. Looking at that boat makes you wonder what...
- Tue Jul 26, 2016 1:43 pm
- Forum: General Topics
- Topic: Alternator
- Replies: 7
- Views: 9143
Re: Alternator
You can test the regulator by placing a jumper wire between the power and field wires on the alternator plug. Start the motor. If you have voltage at the dash meter, the regulator is bad. You can have my spare voltage regulator from the 28. It was converted to one wire by the previous owner. He left...
- Mon Jul 25, 2016 3:53 pm
- Forum: Drivetrain
- Topic: Carb rebuild time?
- Replies: 8
- Views: 12835
Re: Carb rebuild time?
If you need help, contact Ron Spies. Hes a FYC member and a Marinette owner. Lives 1 mile from the club.
- Mon Jul 25, 2016 2:16 pm
- Forum: Vendors
- Topic: Fel-Pro Gaskets
- Replies: 0
- Views: 6977
Fel-Pro Gaskets
If you ever need engine gaskets, you can call Fel-Pro or post in their on-line forum. They are very responsive. http://www.felpro-only.com/break_room_forum/ I was able to order the top end gasket set for our 318, #17250, through Autozone. The set ships direct from the Fel-Pro warehouse and are a nex...
- Mon Jul 25, 2016 1:16 pm
- Forum: General Topics
- Topic: Fuel Filter
- Replies: 20
- Views: 22415
Re: Fuel Filter
The element should be a Perko 0324001ELM. This element measures 1.75" x 1.75". This is the filter in use in our OEM bronze filter housings.
- Mon Jul 25, 2016 1:06 pm
- Forum: Drivetrain
- Topic: Carb rebuild time?
- Replies: 8
- Views: 12835
Re: Carb rebuild time?
Before tearing into the carbs, grab a timing light and verify ignition advance at 2,000+ RPM. If you don't have at least 20 degrees of advance, the advance weights might be rusted or an advance spring may be broken. Easy fix and might only cost you an hour and a few squirts of oil.
- Wed Jul 20, 2016 7:00 am
- Forum: Boat and Hull
- Topic: Regular Maintenance Questions
- Replies: 3
- Views: 6358
Re: Regular Maintenance Questions
I had the same "hard" steering issue with our 28' last season. It was more apparent during starboard turns. This is the direction pulling the cable over the steering gear inside the gear box. The ultimate problem was the steering gear box behind the helm. It was bone dry. I pulled the cabl...
- Tue Jul 19, 2016 12:54 pm
- Forum: General Topics
- Topic: Chrysler 318 / 360 Service Manual Link
- Replies: 1
- Views: 3364
Chrysler 318 / 360 Service Manual Link
The following link contains a copy of the 318 / 360 engine service manual.
http://aventusllc.com/dalewindle/Chrysl ... manual.pdf
http://aventusllc.com/dalewindle/Chrysl ... manual.pdf
- Tue Jul 19, 2016 12:51 pm
- Forum: Vendors
- Topic: Chrysler marine replacement distributors
- Replies: 47
- Views: 64782
Re: Chrysler marine replacement distributors
I bought Pertronix distributors last month. The two part numbers are D241801 (Red Cap) and D241800 (Black Cap). I believe the part number difference is the cap color.
- Mon Jul 18, 2016 10:05 am
- Forum: Vendors
- Topic: Machine shop for cylinder head service in Atlanta Area
- Replies: 5
- Views: 10355
Machine shop for cylinder head service in Atlanta Area
Looking for a machine shop in the Atlanta area to rebuild / refurbish a set of 318 heads. Nothing wrong with the heads. Simply having them serviced while off the motor.
Thanks in advance.
Thanks in advance.