Marinette Boat Forum

I run with my port hole windows open but I have "phifetexb plus" material in the screens. Lets air in but keeps 99 percent water out. I don't have big water in Tennessee river like you have but may work for you.
I will send you a sample if you like. Product comes from Sailrite.
Wayne

Always heard that once wirring has been under water you will have a lot of problems. Don't forget one fuel tank will have water in it too.
Good luck, keep us posted.
Wayne

Erwin Marine in Chattanooga had some old stock at one time. They used to be a dealer.
Ask for Toney

Dover Cylinder Service.
Good people, good price.

Don't know what year you have but I ran into a problem with the leaver on pump that runs on cam is different on older 318. Fastjeff could tell ya more.
Wayne

I learned my lesson too . Had spin/on filters & went back to stock per Fastjeff advise. Mine get hard to open sometimes & I but some "bead blaster lub" on it & come back and unscrew it off. The plug at bottomj is where you drain water out. You may need to use a pipe wrench to h...

this is what I used
https://www.amazon.com/gp/product/B0113 ... UTF8&psc=1

welcome captain. Lots of info on here. Do a search and you can find some info on your 26

I just had a set done for my starbord engine. Machine shop bill was $294. Valve job w/new valves, magaflux and weld crack, Dover cylindler head service. Chattanooga & Atlanta.

wayne

cleanest bilge I've seen on a big M.
Nice job