Search found 17 matches

by Lincolncruiser95
Fri Apr 10, 2020 11:32 am
Forum: Engines
Topic: No Fire
Replies: 69
Views: 107848

Re: No Fire

Yes, if in doubt replace wires. You can never tell what is going on and what sort of job previous owners and mechanics did to introduce corrosion and high resistance. If you start fresh, then you know what you are working with. Stranded wire is cheap and when your choice is that or chasing your tail...
by Lincolncruiser95
Sun Apr 05, 2020 7:37 am
Forum: Engines
Topic: No Fire
Replies: 69
Views: 107848

Re: No Fire

by Lincolncruiser95
Sat Apr 04, 2020 8:20 pm
Forum: Engines
Topic: No Fire
Replies: 69
Views: 107848

Re: No Fire

I'll jump in just for clarification. You have a clean 12 or 12+ v coming in to the ignition switch but 11.5 out? If so start simply and take and remove each component down the line out by use of a jumper, starting with the key switch. You my find you have to re run a wire someplace if the corrosion ...
by Lincolncruiser95
Sun Sep 01, 2019 10:11 am
Forum: Shafts
Topic: Boat in the wet, but shafts won't drip
Replies: 18
Views: 47468

Re: Boat in the wet, but shafts won't drip

Yep now to see if the new plugs and wires cured the popping out the carb over 2k on starboard...once the wind dies down
by Lincolncruiser95
Sat Aug 31, 2019 10:29 pm
Forum: Shafts
Topic: Boat in the wet, but shafts won't drip
Replies: 18
Views: 47468

Re: Boat in the wet, but shafts won't drip

Success! 3/16 did the trick. 4-6 footers today, but it dripped in gear at the dock and not in neutral
by Lincolncruiser95
Thu Aug 29, 2019 11:54 am
Forum: Shafts
Topic: Boat in the wet, but shafts won't drip
Replies: 18
Views: 47468

Re: Boat in the wet, but shafts won't drip

Yep. I did know that and will be checking yet again once I re pack the shafts. Appreciate the knowledge though. Better to be told twice than never
by Lincolncruiser95
Wed Aug 28, 2019 11:09 am
Forum: Shafts
Topic: Boat in the wet, but shafts won't drip
Replies: 18
Views: 47468

Re: Boat in the wet, but shafts won't drip

Thanks Jeff,

Will do.. I'd rather have to repack more often than burn up shafts that are in good shape.
by Lincolncruiser95
Tue Aug 27, 2019 7:09 pm
Forum: Shafts
Topic: Boat in the wet, but shafts won't drip
Replies: 18
Views: 47468

Re: Boat in the wet, but shafts won't drip

Lighting and sideways torque from pulling flanges. Once I pulled the shafts back into the boat I was able to line them right back up. This was taken months ago.
by Lincolncruiser95
Tue Aug 27, 2019 10:19 am
Forum: Shafts
Topic: Boat in the wet, but shafts won't drip
Replies: 18
Views: 47468

Re: Boat in the wet, but shafts won't drip

Huh, interesting, I did pull the packing nut all the way off and verified that I didn't yet burn the shafts. It didn't feel like the packing was stuck and a decent amount of water flowed out from the shafts and shaft log end. I verified the bilge pumps are all working and may just repack the shafts ...
by Lincolncruiser95
Mon Aug 26, 2019 11:52 am
Forum: Shafts
Topic: Boat in the wet, but shafts won't drip
Replies: 18
Views: 47468

Re: Boat in the wet, but shafts won't drip

Tried that, been screwing with it for a few weeks with a 4 hour round trip each time to get to the boat. When run loose the flow out the back of the nut was a steady stream when stopped and still got hot when running. ( No flow out the shaft side) Guess I will try and remove one of the three packing...