Search found 14 matches
- Mon Jul 27, 2015 12:55 pm
- Forum: Electrical and Electronics
- Topic: toggle switch replacement
- Replies: 0
- Views: 5973
toggle switch replacement
Hello fellow Marinette owners, Well the boat is running great On third tank of gas and almost everything works fine. Except for some of the "toggle aircraft type ampere rated breakers" a few of these broke off and a few more have big cracks down at the pivot point of the switch. The switch...
- Wed Jul 22, 2015 7:57 am
- Forum: Cabin and Interior
- Topic: interior removal for mold mitigation
- Replies: 16
- Views: 23100
Re: interior removal for mold mitigation
Thank you guys for all of the information. I didn't end up paying 20K for the boat but I did pay more than most 28' expresses sell for. But I looked at and tested a lot of boats. I settled on a Marinette, then an express, then a 28 and a twin. I bought it because it is the boat I wanted. This boat w...
- Wed Jul 15, 2015 10:39 am
- Forum: Cabin and Interior
- Topic: interior removal for mold mitigation
- Replies: 16
- Views: 23100
Re: interior removal for mold mitigation
Hello All, Thanks for all of the replies. I did purchase the boat for much less than the asking price. I wanted a twin screw 28' express and I looked for months at everything I could find within 400 miles (think I looked at 11 boats) of Erie, pa and this was far and away the best. It came with about...
- Mon Jul 13, 2015 8:29 am
- Forum: Cabin and Interior
- Topic: interior removal for mold mitigation
- Replies: 16
- Views: 23100
Re: interior removal for mold mitigation
Hello Tranquilo, When you say ripped out dose this mean that things were removed destructively (because you did not plan to re-use them) or does this mean things were disassembled. The interior of this boat is in very good condition and I want to remove, mitigate mold and re-install as much as possi...
- Mon Jul 13, 2015 8:19 am
- Forum: Cabin and Interior
- Topic: interior removal for mold mitigation
- Replies: 16
- Views: 23100
- Mon Jul 13, 2015 6:41 am
- Forum: Cabin and Interior
- Topic: interior removal for mold mitigation
- Replies: 16
- Views: 23100
interior removal for mold mitigation
Hello, I have been looking for an 28' express for a few months now and have found the one I want. It is very expensive but in in very good condition except for one possible show stopper. I have allergies to some molds and the interior of this boat seems to harbor some molds that make me very sick. I...
- Wed Jul 01, 2015 9:51 am
- Forum: Boat and Hull
- Topic: oxidation questions
- Replies: 5
- Views: 6929
Re: oxidation questions
Hi Dave, Thanks for the information. I was also very concerned with the fact that the guy said he knew nothing about the meter. I am thinking of going back over with some sand paper and asking the guy if I can remove the bottom paint from the area that looks the worst and see how much pitting I find...
- Tue Jun 30, 2015 10:05 pm
- Forum: Boat and Hull
- Topic: oxidation questions
- Replies: 5
- Views: 6929
Re: oxidation questions
hello, I looked at another boat today and it look good. only had 196 hours. engine looked good, paint good interior very good..... This boat has been out of the water for almost three years. The owner said it was stored indoors and it did look clean. The pictures show the bottom and the amount of co...
- Tue Jun 30, 2015 7:01 pm
- Forum: Boat and Hull
- Topic: oxidation questions
- Replies: 5
- Views: 6929
oxidation questions
wondering about the severity of this oxidation
- Mon Jun 29, 2015 8:36 pm
- Forum: General Topics
- Topic: Oxidation
- Replies: 10
- Views: 12083
Re: Oxidation
BigM y wacdlw , By all means hire a Marine Surveyor who knows aluminum boats :!: He will be worth his weight in corrosion/oxidation . :lol: bill This is why a signature is important, where do you hail from? :roll: salt water or fresh :?: I am from Erie, pa. The boat is on lake Erie. I do plan on ha...