Search found 173 matches
- Tue Apr 13, 2021 8:46 am
- Forum: Engines
- Topic: 318/392 Stroker Motors
- Replies: 90
- Views: 284565
Re: 318/392 Stroker Motors
Dewinterized March 12th and a vibration showed up. Turned out to be fouled spark plugs caused by a stuck choke on the starboard engine. Hopefully a prop swap when the water warms up a bit.
- Wed Nov 25, 2020 9:19 am
- Forum: Engines
- Topic: 318/392 Stroker Motors
- Replies: 90
- Views: 284565
Re: 318/392 Stroker Motors
Prop swap will have to wait until next spring, winterized the boat yesterday. Put about 40 hours on the motors this season. They are starting and running great, maintaining a consistent engine temperature. Since rebuild they have 308 hours on them.
- Wed Aug 26, 2020 8:41 pm
- Forum: Engines
- Topic: 318/392 Stroker Motors
- Replies: 90
- Views: 284565
Re: 318/392 Stroker Motors
Okay, went to Delta Propeller in Cleves, Ohio today to pick up my stock three blade props after reconditioning. They look like new. They want to add .90 pitch to my 4 blade props, now i just need to switch them. I know a diver. Stay tuned.
- Wed Aug 26, 2020 8:37 pm
- Forum: General Topics
- Topic: Pressurized wzter system piping and fittings
- Replies: 4
- Views: 10210
Re: Pressurized wzter system piping and fittings
Made up a new line with Starbrite fittings. Whoever created theses fittings is a genious. I will install it over the weekend. Thanks for your help! Qest fittings ate gone.
- Sat Aug 15, 2020 10:39 am
- Forum: General Topics
- Topic: Pressurized wzter system piping and fittings
- Replies: 4
- Views: 10210
Pressurized wzter system piping and fittings
Replaced my original hot water on my boat recently and the fittings that connect to the water heater are dripping slightly. I cannot find new fittings like mine anywhere. The plastic tubing has"iapmo" on it. 3/8" x 1/2" od is the size. Thanks!
- Wed Aug 12, 2020 12:37 pm
- Forum: Engines
- Topic: Fuel Filter inside our gas tanks
- Replies: 5
- Views: 13786
Re: Fuel Filter inside our gas tanks
Replaced the fuel pump (mechanical) problem solved.
Did not think it was debris in the fuel system, been buying my gas at the same marina all along. The other engine was doing fine, separate tank.
Did not think it was debris in the fuel system, been buying my gas at the same marina all along. The other engine was doing fine, separate tank.
- Sun Jul 26, 2020 7:27 am
- Forum: Engines
- Topic: Fuel Filter inside our gas tanks
- Replies: 5
- Views: 13786
Fuel Filter inside our gas tanks
Having a fuel delivery problem on our 1987 32ft sedan fly bridge. Is there a filter inside the tank? I believe my fuel pump is the problem. We have two 75 gallon tanks. The starboard engine is running great.Thanks your imput in advance.
- Tue Jul 21, 2020 3:10 am
- Forum: Engines
- Topic: 318/392 Stroker Motors
- Replies: 90
- Views: 284565
Re: 318/392 Stroker Motors
Presently 15 x 14.25 four blade props. I believe it is under propped slightly. I am having the original props reconditioned. I still working with Delta Propeller for a different set.
- Fri Jun 26, 2020 8:43 am
- Forum: Engines
- Topic: 318/392 Stroker Motors
- Replies: 90
- Views: 284565
Re: 318/392 Stroker Motors
1600rpm 10mph, 3,000rpm 20mph.
- Thu Jun 25, 2020 3:47 pm
- Forum: Engines
- Topic: 318/392 Stroker Motors
- Replies: 90
- Views: 284565
Re: 318/392 Stroker Motors
So full of water, eisenglass, full of fuel, curtains all the stuff 26mph at 4,000 rpm. Clean bottom.